Autonics Photoelectric Sensor, Photoelectric Type BTS1M-TDTD-P Stroke_26^520mm 50 kN 1313 2

50 kN  1313 2

Specification item model symbol Specification information With auto switch D With auto switch Mounting support type B Basic type (with bosses on both sides) tube inner diameter 20 tube inner diameter 20mm cylinder stroke 15 Cylinder additional symbol - Rubber cushion

Specification item model symbol Specification information With auto switch D With auto switch installation support T center trunnion type tube material - aluminum tube tube inner diameter 100 Tube inner diameter 100mm Types of port screws - Rc cylinder stroke 85 Cylinder additional symbol - No bellows

5 27 290 170 29

storage: 35 to 95 %RH (no freezing or condensation) Protection structure IP67(IEC standard) Connection Cable connector type Connector type M12 Connector Cable Standard/material Oil resistant cable (gray): polyvinyl chloride (oil resistant PVC) Material Case / Nut: stainless steel 303 (SUS303

Autonics Photoelectric Sensor, Photoelectric Type BTS1M-TDTD-P Stroke_26^520mm 50 kN 1313 2Sensing type Through beam type Sensing distance 1m Sensing target Opaque material of min. 2mm Light source Red LED(650nm) Response time Max. 1ms Power voltage 12 24VDC 10%(ripple P P: max. 10%) Current consumption Emitter Receiver: Max. 20mA Operation mode Dark ON Control output PNP open collector Connection type Cable type(2. 5, 2m) Environment_Ambient illumination Sunlight: Max. 10,000lx, Incandescent lamp: Max. 3,000lx (received illumination)