Autonics photoelectric micro sensor, Through-beam type BS3-F1M-P Series_17^323 Specification item model symbol Specification

Specification item model symbol Specification information bearing type L ball bush bearing tube inner diameter 20 tube inner diameter 20mm Types of port screws - M5X0

Bore Type Round Bore Diameter 130 mm Outside Diameter 230 mm Overall Width 40 mm Closure Type Double Shielded Row Type & Fill Slot Single Row Non-Fill Slot Snap Ring Included Without Snap Ring Internal Clearance C3 Operating Temperature Range -40 to 250 ºF Cage Type Pressed Dynamic Load Capacity 41580 lbf Static Load Capacity 33000 lbf Precision Rating ISO Class 0 Seal Type None Finish/Coating Uncoated Bearing Material High Carbon Chrome Steel Cage Material Steel Inner Ring Width 1

Rear exhaust type that does not interfere with work

NC-SPOTTING DRILLS D2307050 5 5 60 15 120º 14

Extra Hole in the bit tip for TORX® Tamper Resistant security screws

Autonics photoelectric micro sensor, Through-beam type BS3-F1M-P Series_17^323 Specification item model symbol SpecificationSensing type Through beam type Sensing distance 5mm Sensing target Opaque Min. sensing target 0. 8 mm 1. 8 mm Hysteresis(distance) 0. 05mm Response time Light ON: Max. 20, Dark ON: Max. 100 Response frequency 2kHz Light source Infrared LED Peak emission wavelength 940nm Operation mode Light ON Dark ON(set by control wire) Indicator Operation indicator (red LED) Weight Approx. 50g Power voltage 5 24VDC 10%(ripple P P : max. 10%) Current consumption