Tork Craft | Chassis Screw Sheet Metal Punch 32mm Cordless_Drill 1/4"M X 1/4"F 51mm Extension

1/4"M X 1/4"F 51mm Extension

and chiselling effortlessly in concrete

CE EN 352-1 ( H=28db

especially for curve cuts

transfer boxes etc

Tork Craft | Chassis Screw Sheet Metal Punch 32mm Cordless_Drill 1/4"M X 1/4"F 51mm ExtensionSheet Metal Punch The Tork Craft Chassis Screw Sheet Metal Punch is a hand tool used to punch a hole through sheet metal. It is a very simple tool that consists of a punch, die and screw. To set up the punch, first drill a pilot hole into a piece of sheet metal with a step drill bit, place the die over the draw stud before inserting the stud through the pilot hole. The punch is then threaded onto the tip of the draw stud and brought close to the sheet