Howe Panhard Bar Axle Mount - 8" Length - 3/4" Thread Distributors Magnetos & Crank Triggers Camaro Style

Camaro Style

Manifold not equipped with EGR

86 and newer blocks with one piece rear main seals to accept an older style two piece seal crank shaft

Bent Tube Design Provides Excellent Fuel Flow Capacity

Eibach Spring Rear 16in x 5in x 200# Platinum

Howe Panhard Bar Axle Mount - 8" Length - 3/4" Thread Distributors Magnetos & Crank Triggers Camaro StyleFits any 3" O. D. axle tube. Made to use on the front of a quick change or either side of a non quick or Ford 9". 8" from the center of the axle to the center of the heim. Available with 3 4" or 5 8" fine thread for the corresponding rod end bearing. Made just long enough so that the panhard bar clears the quick change cover. Clamps to any 3" axle tube. 13" from the center of the axle to the center of the 3 4" rod end bearing. Howe Racing Enterprises