COMP Cams Hi-Tech Pushrod - 8.050 in Long - 3/8 in Diameter - 0.080 in Thick Wall - Chromoly - Set of 16 R03J015L 32 in Length

32 in Length

Looking for increased visibility

long duration applicationsWorks with electronic ignitions and MSD Ignition Controls (ballast resistor required for points systems)100:1 turns ratio and lower primary resistance produce high voltage outputWindings are encased in blue epoxy and secured with extruded bracketsSpark plug style terminal and threaded brass primary studsSupplied with rubber shock mountsCARB E

Includes BOSS Primary Timing Chain Tensioners

These springs have been tested and proven very popular in both the drag and oval racing markets

COMP Cams Hi-Tech Pushrod - 8.050 in Long - 3/8 in Diameter - 0.080 in Thick Wall - Chromoly - Set of 16 R03J015L 32 in LengthThe pushrod is one of the most important pieces of the valve train, but all too often it's taken for granted. Pushrods not only have to be strong enough to not fail, bend or burn up at the ends, they must also match the frequency of all the rest of the parts in the valve train, as well as the rpm at which the engine will be run. Today's all out race engines demand the highest quality components at every step, and COMP Cams Hi Tech Pushrods fill that